Windows Home Server 2011 features an impressive remote access site allowing you access to your digital media as well as remote access to your home computers. One of the components which allows all of this functionality to work is the Client Connector. This software element, installed on the client computers (which can be PCs or […]
Windows Home Server 2011 features an impressive remote access site allowing you access to your digital media as well as remote access to your home computers. One of the components which allows all of this functionality to work is the Client Connector. This software element, installed on the client computers (which can be PCs or Macs for the record) enables the Home Server to backup your systems, along with enabling the features required on your system for the RemoteApp Remote Desktop Services connections to remote onto your PC from anywhere online.
In the Home Server Launchpad, the main user facing element of the Client Connector, there is a link for Remote Web Access which directly launches a browser session to the Windows Home Server 2011 Remote Web Access site, after you have configured your free homeserver.com domain with Microsoft and GoDaddy (this is configured using the Windows Home Server 2011 Dashboard).
In a normal home scenario with a router from your ISP or that you purchased elsewhere, clicking the Remote Web Access link will launch the Home Server Remote Web Access site using the homeserver.com domain you registered as the URL. In my not-so-normal home network, I use a Cisco PIX firewall as my edge device means I have a problem.
Unlike a router, the PIX cannot route packets back through the same interface where the packet was initially received.
This sentence from the Cisco PIX Frequently Asked Questions explains the problem in one. Clicking the Remote Web Access link launches the browser session to the correct URL, however because that URL resolves to the Internet IP associated with the outside interface on the PIX means the traffic flow is not permitted back through the firewall.
Being a Windows Systems Administrator, I like things on Windows, which means I prefer to run my infrastructure services like DNS and DHCP on the Home Server instead of allowing the router to do it. The DNS role in Windows Server 2008 R2 (the foundation for Windows Home Server 2011), and the DNS role in any Windows Server operating system for that matter allows you to create multiple zones for multiple domains to which the server will respond with DNS resolutions, and this is where the fix derives from.
The fix, or trick as the case may be, is to use DNS to reroute the client computer by resolving the homeserver.com domain name to the internal IP address of the Home Server, and away from the Internet side of the network, which ultimately will improve the performance of the Remote Web Access interface too.
On the Home Server, launch the DNS Manager console from Administrative Tools.
In the console, right-click on Forward Lookup Zones, and select New Zone.
In the New Zone Wizard on the Zone Type panel, select the Primary Zone option,
On the Zone Name panel, enter the full domain name that you specified in the Domain Name Setup Wizard from the Home Server Dashboard (in this example, I’m using server.homeserver.com).
On the Zone File panel, you can leave the default option to Create a New DNS Zone File.
On the Dynamic Updates panel, leave the option set to Do Not allow Dynamic Updates. This will help to prevent any rogue clients on the network from poisoning the DNS zone and directing your clients to the wrong IP address.
On the Completing the New Zone Wizard panel, verify that you can specified the homeserver.com domain correctly. and then select Finish to complete the wizard.
Back in the DNS Console, your new zone will be visible. In the new zone, right-click and select New Host (A or AAAA).
In the New Host dialog, leave the Name field blank and in the IP Address field, specify the IP Address of your Home Server. This IP Address should either be statically assigned to the Home Server, or it should be configured as a DHCP Reservation on whatever device is running your DHCP Server on the network (although if the Home Server is your DHCP Server, then this should obviously be static).
Congratulations. Your internal clients will now be able to access the Home Server Remote the Web Access site, using the Client Connector user interface as Microsoft had intended, without a single packet touching the outside interface of your server.
If in your home network, you are using the router to perform DNS queries on your behalf, but your router prevents connections through the same interface that the connection was initiated as the PIX does, you could also implement this trick using the DNS HOSTS file, however this would need to be performed on a per client basis editing the HOSTS file. Using this example, the HOSTS file line item would be configured as follows:
192.168.1.100 server.homeserver.com # Windows Home Server
Remember to flush your DNS cache on the clients using ipconfig /flushdns before testing your work regardless of whether you used the DNS or the HOSTS file methods to implement it.